The 3/4" x 1/2" x 1/2" Easy Loc Tee is a versatile reducing fitting that solves two problems at once. It allows you to split a single line into two directions while simultaneously reducing the tubing size from 3/4" mainline down to 1/2" distribution tubing.
This "Reducing Tee" is perfect for transitioning from a heavy-duty supply header to smaller garden rows or raised beds. It features one 3/4" Easy Loc connection and two 1/2" Easy Loc connections, providing a secure, leak-proof transition without the need for multiple adapters or glued reducing bushings.
Understanding compatibility is key. This fitting connects two different sizes of tubing.
| Specification | Details |
|---|---|
| Product Type | Reducing Tee (3/4" to 1/2") |
| Connection 1 (Inlet/Run) | 3/4" Easy Loc (Fits .940" OD Tubing) |
| Connection 2 (Branch) | 1/2" Easy Loc (Fits .700" OD Tubing) |
| Connection 3 (Run/Branch) | 1/2" Easy Loc (Fits .700" OD Tubing) |
| Operating Pressure | 0 - 60 PSI (Optimal range: 20-30 PSI) |
| Material | Polypropylene with Carbon Black/UV Stabilizers |
Follow these steps to ensure a leak-proof connection on both tubing sizes.
Step 1: Prepare Tubing
Cut both your 3/4" and 1/2" tubing squarely. Ensure the cuts are clean and free of burrs.
Step 2: Unlock the Fittings
Rotate the locking collars on all three ends backwards to expose the internal barbs. Do not remove the nuts completely.
Step 3: Connect Tubing
Match the tubing size to the correct port (Large nut = 3/4", Small nuts = 1/2"). Push the tubing firmly over the barb until it hits the stop.
Step 4: Lock it Down
Twist the locking collars forward (over the tubing) to clamp them in place. Hand-tighten firmly.
Check your tubing sizes carefully:
Ensure your reducing setup is complete:
Dec 20th 2025
Dec 19th 2025
Dec 19th 2025
Dec 18th 2025
