10 Edible Wild Plants You Can Safely Forage This Spring
Feb 12th 2026
Spring foraging reconnects you to nature and your local landscape after a long winter indoors. It's
…
See More
The 3/4" Socket x 1/2" FPT Reducing Elbow is a multi-tasking component that turns a 90-degree corner, reduces the line size, and adapts from pipe to threads all in one fitting. This specific configuration allows you to run a 3/4" PVC supply line and immediately transition to a 1/2" threaded riser or sprinkler head at the corner. It is one of the most efficient irrigation fittings for installing swing joints or pop-up sprinklers directly off a lateral line.
Molded from durable Schedule 40 PVC, this elbow features a solvent weld socket on the 3/4" side and clean Female Pipe Threads (FPT) on the 1/2" side. This design eliminates the need for separate bushings or adapters, creating a cleaner and more professional installation.
Verified specifications for precise fitting.
| Specification | Details |
|---|---|
| Product Type | Reducing Elbow (90°) |
| Connection 1 | 3/4" Slip (Socket) |
| Connection 2 | 1/2" Female Pipe Thread (FPT) |
| Material | Schedule 40 PVC (White) |
| Standards | ASTM D-1784, ASTM D-2466, NSF-PW |
| MPN | 407-101 |
Install properly to ensure threads remain intact.
Step 1: Glue the Slip Side
Clean and prime the 3/4" pipe and the elbow's socket using Purple Primer. Apply PVC Glue, insert the pipe fully, twist a quarter turn, and hold for 30 seconds.
Step 2: Prepare the Threads
Wrap the male threads of your 1/2" riser or nipple with thread seal tape. 3-4 wraps is usually sufficient.
Step 3: Connect the Threaded Side
Screw the male component into the 1/2" FPT outlet by hand until snug. Do not use glue on the threads.
Step 4: Final Tighten
Use a wrench to tighten one additional half-turn. Do not overtighten metal nipples into this plastic elbow, as it can cause the PVC to crack.
Ensure you have the right sizes:
Everything you need for a secure installation:
Feb 12th 2026
Feb 11th 2026
Feb 10th 2026
Feb 9th 2026