The 3/4" Compression Female Hose Start Tee allows you to run two separate high-volume lines directly from a single faucet or timer. Featuring a 3/4" Female Hose Thread (FHT) Swivel in the center and two 3/4" compression ports on the sides, this fitting is ideal for feeding two different zones or creating a perimeter loop with 3/4" poly tubing.
We strongly recommend installing a filter upstream to protect your system from debris. As one of our most specialized irrigation fittings, this tee uses heavy-duty internal compression rings to grip the larger .940" OD tubing securely, ensuring a permanent, leak-proof connection even under higher flow rates.
Verify tubing dimensions before purchasing.
| Specification | Details |
|---|---|
| Product Type | Female Hose Start Tee (Swivel) |
| Inlet (Center) | 3/4" Female Hose Thread (FHT) Swivel |
| Outlets (Sides) | 3/4" Compression (Fits .940" OD Tubing) |
| Operating Pressure | 0 - 60 PSI (Optimal: 20-30 PSI) |
| Material | High-Impact ABS Plastic |
| Manufacturer | NDS |
| MPN | CSTW 900 |
Connect your high-flow system in minutes.
Step 1: Check Washer
Ensure the hose washer is seated inside the swivel nut. This is essential for a watertight connection to the faucet.
Step 2: Connect to Source
Screw the swivel tee onto your faucet, timer, or pressure regulator. Hand-tighten securely. Do not use a wrench.
Step 3: Insert Tubing
Cut two lengths of 3/4" poly tubing squarely. Push each piece into the compression outlets.
Pro Tip: 3/4" tubing can be stiff. Warm the ends in the sun or hot water to make insertion easier. Rock the tubing until it seats fully past the internal ring.
Ensure this tee fits your components:
Everything you need for a robust head assembly:
Oct 8th 2026
Oct 7th 2026
Oct 6th 2026
Oct 5th 2026
