The 3/4" Compression Female Hose Start is the foundational fitting for high-capacity drip systems. Designed to connect a standard 3/4" outdoor faucet or hose bibb directly to 3/4" mainline tubing, this adapter allows you to maximize water flow to large gardens, orchards, or vineyard rows.
Featuring a convenient 3/4" Female Hose Thread (FHT) Swivel, this fitting attaches easily to your water source, timer, or filter without twisting the heavy-duty tubing. As one of our most robust irrigation fittings, it utilizes a strong internal compression ring to grip the larger .940" OD tubing, ensuring a blow-out proof seal even under substantial pressure.
Verify tubing dimensions before purchasing.
| Specification | Details |
|---|---|
| Product Type | 3/4" Female Hose Start (Swivel) |
| Connection 1 (Inlet) | 3/4" Female Hose Thread (FHT) Swivel |
| Connection 2 (Outlet) | 3/4" Compression (Fits .940" OD Tubing) |
| Operating Pressure | 0 - 60 PSI (Optimal: 20-30 PSI) |
| Material | High-Impact ABS Plastic |
| Manufacturer | NDS |
| MPN | CSA 900 or CSAW 900 |
Install your heavy-duty system in minutes.
Step 1: Check the Washer
Ensure the rubber hose washer is seated inside the swivel nut. This is critical for a leak-free connection to the faucet.
Step 2: Connect to Source
Screw the swivel nut onto your hose bibb, pressure regulator, or filter. Hand-tighten firmly until snug. Do not use tools.
Step 3: Insert Tubing
Cut your 3/4" poly tubing squarely. Push it into the compression end of the adapter.
Pro Tip: 3/4" tubing is stiff! Warm the end in the sun or hot water to make insertion much easier. Rock the tubing back and forth while pushing until it passes the internal ring.
Ensure this adapter fits your system:
Everything you need for a high-flow head assembly:
May 26th 2026
May 21st 2026
May 20th 2026
May 19th 2026
