The 1/2" Figure 8 End is the most economical and reliable method for terminating a run of 1/2" poly tubing. Its simple design utilizes the tubing itself to create a kinked seal, ensuring a leak-proof closure that stays secure even under pressure.
The Figure 8 design eliminates the need for expensive threaded caps or complex mechanisms, significantly lowering your system's overall cost. As one of the most affordable irrigation fittings on the market, it is the ideal choice for growers and landscapers looking to maximize their budget. You get a reliable, leak-proof seal for a fraction of the price of alternative end closures.
Standard sizing for 1/2" irrigation systems.
| Specification | Details |
|---|---|
| Product Type | Line End Closure (Figure 8) |
| Tubing Compatibility | .690" - .710" OD (Standard 1/2" Poly) |
| Operating Pressure | 0 - 60 PSI |
| Material | UV Resistant Polypropylene |
| Reusability | Yes (Infinite Open/Close cycles) |
| MPN | A5-A188 |
Secure the end of your line in seconds.
Step 1: Thread the Tubing
Insert the end of your 1/2" poly tubing through one of the "eyes" of the Figure 8 fitting. Slide the fitting up the tubing about 6 inches.
Step 2: Fold the Tubing
Bend the end of the tubing over to create a tight kink. This fold stops the water flow.
Step 3: Secure the Fold
While holding the fold, slide the Figure 8 fitting back down the tubing and insert the bent end into the second eye of the fitting. Pull tight to lock the kink in place.
Verify this fitting fits your tubing:
Ensure your installation is secure and professional with these essentials:
Feb 9th 2026
Feb 5th 2026
Feb 4th 2026
Feb 3rd 2026
