Pressure Regulators

Pressure Regulators

Pressure regulators reduce incoming water pressure to a set pressure usable by a drip system. A pressure regulator is used when the incoming pressure is too high for the emitters or fittings. The flow rate of the regulator should be matched with the system. Pressure regulation does not take effect until minimum specified flow passes through the regulator.


NOTE: It is recommended that pressure regulators be situated after valves or shutoffs. They may be damaged if left under constant pressure, unless stated otherwise.

  • Senninger Pressure Regulators

    The heaviest duty and most reliable regulator we carry.
  • Array.prod_name|replace:

    Senninger Lawn & Garden Regulators (Hose Thread)
    Review star icon Review star icon Review star icon Review star icon Review star icon
    Email iconEmail to a Friend
    Availability: In Stock

    The #1 company in commercial pressure regulators has now introduced a lower price, hose threaded residential model. It has a compact (3 1/2" long) body made of high impact thermoplastic and a stainless steel compression spring. Preset pressure from 10-40 PSI and flow rates from 0.1- 7 GPM makes it perfect for almost any situation.

    • Name
    • Weight
    • Price
    • Qty
    •  
    • 10 PSI Sen Hose Reg (FHxMH)
      PRSG10
    • 0.145 lbs
    • $7.90
    • 20 PSI Sen Hose Reg (FHxMH)
      PRSG20
    • 0.145 lbs
    • $7.90
    • 30 PSI Sen Hose Reg (FHxMH)
      PRSG30
    • 0.145 lbs
    • $7.90
    • 40 PSI Sen Hose Reg (FHxMH)
      PRSG40
    • 0.145 lbs
    • $7.90
  • Array.prod_name|replace:

    Senninger Limit Valve
    Email iconEmail to a Friend
    Availability: In Stock

    These new regulators can operate under constant pressure. This means that you can use a single pressure regulator for multiple zones. This regulator must be located after the filter, since it is designed to work with clean water.
    Preset pressure from 10, 20, 30 or 40 PSI and flow rates from 0.5- 18 GPM.
    These are 3/4" FPT Inlet x 3/4" FPT Outlet

    • Name
    • Weight
    • Price
    • Qty
    •  
    • 10 PSI Limit Valve
      PRLV10
    • 0.45 lbs
    • $19.75
    • 20 PSI Limit Valve
      PRLV20
    • 0.45 lbs
    • $19.75
    • 30 PSI Limit Valve
      PRLV30
    • 0.45 lbs
    • $19.75
    • 40 PSI Limit Valve
      PRLV40
    • 0.45 lbs
    • $19.75
  • Array.prod_name|replace:

    Senninger 1" Limit Valve
    Email iconEmail to a Friend
    Availability: In Stock

    The following are 1" FPT Inlet x 1" FPT Outlet

    • Name
    • Weight
    • Price
    • Qty
    •  
    • 1" Sen Limit Valve--30#
      PR1LV30
    • 0.506 lbs
    • $20.50
    • 1" Sen Limit Valve--40#
      PR1LV40
    • 0.506 lbs
    • $20.50
  • Array.prod_name|replace:

    Senninger Low Flo Regulator, Hose
    Email iconEmail to a Friend
    Availability: In Stock

    FHT x MHT for use with T filters, inline filters or Hose-End Y filters.

    • Name
    • Weight
    • Price
    • Qty
    •  
    • Sen Lo Flo Hose--12# (FHxMH)
      PRSLHH12
    • 0.335 lbs
    • $10.50
    • Sen Lo Flo Hose--20# (FHxMH)
      PRSLHH20
    • 0.339 lbs
    • $10.50
    • Sen Lo Flo Hose--30# (FHxMH)
      PRSLHH30
    • 0.339 lbs
    • $10.50
  • Array.prod_name|replace:

    Senninger Low Flow Regulator
    Email iconEmail to a Friend
    Availability: In Stock

    All have flow rates of 0.1-8 GPM unless otherwise noted.

    3/4" FPT x MHT for use with pipe threaded Y type filters.

    • Name
    • Weight
    • Price
    • Qty
    •  
    • Sen Low Flow--12# (FPxMH)
      PRSLPH12
    • 0.326 lbs
    • $10.20
    • Sen Low Flow--30# (FPxMH)
      PRSLPH30
    • 0.331 lbs
    • $10.20
  • Array.prod_name|replace:

    Senninger Low Flow Regulator
    Email iconEmail to a Friend
    Availability: In Stock

    3/4" FPT x 3/4" FPT for use with Y type Filters

    • Name
    • Weight
    • Price
    • Qty
    •  
    • 3/4" Sen Low Flow-12# (FPxFP)
      PR12
    • 0.297 lbs
    • $9.50
    • 3/4" Sen Low Flow-20# (FPxFP)
      PR20
    • 0.299 lbs
    • $9.50
    • 3/4" Sen Low Flow-30# (FPxFP)
      PR30
    • 0.302 lbs
    • $9.50
  • Array.prod_name|replace:

    Senninger Medium Flow Regulator
    Email iconEmail to a Friend
    Availability: In Stock

    All below are 3/4" FPT x 3/4" MHT

    • Name
    • Weight
    • Price
    • Qty
    •  
    • Sen Med Flow--12# (FPxMH)
      PRSMPH12
    • 0.433 lbs
    • $12.10
    • Sen Med Flow--30# (FPxMH)
      PRSMPH30
    • 0.447 lbs
    • $12.10
  • Array.prod_name|replace:

    Senninger Medium Flow Regulator (FPxFP)
    Email iconEmail to a Friend
    Availability: In Stock

    All have flow rates of 2-20 GPM
    All below are 3/4" FPT x 3/4" FPT

    • Name
    • Weight
    • Price
    • Qty
    •  
    • Sen Med Flow--12# (FPxFP)
      PRSMPP12
    • 0.405 lbs
    • $11.50
    • Sen Med Flow--20# (FPxFP)
      PRSMPP20
    • 0.413 lbs
    • $11.50
    • Sen Med Flow--30# (FPxFP)
      PRSMPP30
    • 0.416 lbs
    • $11.50
    • Sen Med Flow--40# (FPxFP)
      PRSMPP40
    • 0.422 lbs
    • $11.50
  • Array.prod_name|replace:

    Senninger 1" Medium Flow Regulator
    Email iconEmail to a Friend
    Availability: In Stock

    Flow rates of 2-20 GPM
    All below are 1" FPT x 1" FPT

    • Name
    • Weight
    • Price
    • Qty
    •  
    • 1" Sen Med Flow--12# (FPxFP)
      PR1S12
    • 0.462 lbs
    • $12.25
    • 1" Sen Med Flow--25# (FPxFP)
      PR1S25
    • 0.48 lbs
    • $12.25
    • 1" Sen Med Flow--40# (FPxFP)
      PR1S40
    • 0.473 lbs
    • $12.25
  • Array.prod_name|replace:

    Senninger High Flow
    Email iconEmail to a Friend
    Availability: In Stock

    Flow rates of 10-32 GPM
    All below are 1 1/4" FPT x 1" FPT

    • Name
    • Weight
    • Price
    • Qty
    •  
    • Sen Hi Flo--10# (1 1/4"FPx1"FP)
      PRSH10
    • 0.551 lbs
    • $25.00
    • Sen Hi Flo--30# (1 1/4"FPx1"FP)
      PRSH30
    • 0.59 lbs
    • Each:   $23.80

  • Other Pressure Regulators

  • Array.prod_name|replace:

    Olson Hose Reg (FHxMH)
    Email iconEmail to a Friend
    Availability: In Stock

    Shorter body for compact installation. A very accurate low priced regulator. The maximum inlet pressure is 100 PSI.

    These regulators can be used before valves and timers!

    For use with T filter, Inline filter or Hose end Y filters.
    FHT x MHT

    • Name
    • Weight
    • Price
    • Qty
    •  
    • 10# Olson Hose Reg (FHxMH)
      PROH10
    • 0.13 lbs
    • $8.75
    • 25# Olson Hose Reg (FHxMH)
      PROH25
    • 0.137 lbs
    • $8.75
  • Array.prod_name|replace:

    Adjustable Whole House Regulator
    Email iconEmail to a Friend
    Availability: In Stock

    Adjustable Whole House Regulator

    • Name
    • Weight
    • Price
    • Qty
    •  
    • 3/4" Adjustable Whole House Regulator
      PRHOUSE34
    • 2.295 lbs
    • $80.00
    • 1" Adjustable Whole House Regulator
      PRHOUSE1
    • 3.661 lbs
    • $85.00
  • Array.prod_name|replace:

    3/4" Netafim Pressure Regulators
    Email iconEmail to a Friend
    Availability: In Stock

    With these Netafim regulators you can change the pressure of your irrigation system at any time without disconnecting the line. Simply remove the cap and change the spring cartridge.

    • 120 PSI maximum inlet pressure
    • Flow range of 5.5 to 17.6 GPM
      Will not operate below the minimum stated flow
    • Uses one spring cartridge (included), replacements available
    • 3/4" female pipe thread (FPT) inlet and male pipe thread (MPT) outlet

    • Name
    • Weight
    • Price
    • Qty
    •  
    • 3/4" Net Reg--12 PSI
      (FPT x MPT)
      PRNET12
    • 0.232 lbs
    • $12.50
    • 3/4" Net Reg--20 PSI
      (FPT x MPT)
      PRNET20
    • 0.238 lbs
    • $12.50
    • 3/4" Net Reg--35 PSI
      (FPT x MPT)
      PRNET35
    • 0.24 lbs
    • $12.50
    • 3/4" Net Reg--50 PSI
      (FPT x MPT)
      PRNET50
    • 0.201 lbs
    • $12.50
  • Array.prod_name|replace:

    1 1/2" Netafim Pressure Regulators
    Email iconEmail to a Friend
    Availability: In Stock

    With these Netafim regulators you can change the pressure at any time without disconnecting the line. Simply remove the cap and change the spring cartridges.

    • 120 PSI maximum inlet pressure
    • Flow range of 11 to 35 GPM
      Will not operate below the minimum stated flow
    • Uses two spring cartridges (included), replacements available
    • 1 1/2" male pipe thread (MPT) inlet and outlet

    • Name
    • Weight
    • Price
    • Qty
    •  
    • 1 1/2" Net Reg--12 PSI
      (MPT x MPT)
      PR112NET12
    • 0.62 lbs
    • $34.00
    • 1 1/2" Net Reg--35 PSI
      (MPT x MPT)
      PR112NET35
    • 0.623 lbs
    • $34.00
  • Array.prod_name|replace:

    Netafim 2" Pressure Regulator
    Item #: PR2NET
    Email iconEmail to a Friend
    Availability: In Stock

    With these Netafim regulators you can change the pressure at any time without disconnecting the line. Simply remove the cap and change the spring cartridges.

    • 120 PSI maximum inlet pressure
    • Flow range of 22 to 70 GPM
      Will not operate below the minimum stated flow
    • 2" female pipe thread (FPT) inlet and outlet
    • Uses four spring cartridges (included), replacements available

    • Name
    • Weight
    • Price
    • Qty
    •  
    • 2" Neta Reg--12 PSI
      (FPT x FPT)
      PR2NET12
    • 3.925 lbs
    • $125.00
    • 2" Neta Reg--35 PSI
      (FPT x FPT)
      PR2NET35
    • 3.925 lbs
    • $125.00
  • Array.prod_name|replace:

    Netafim Regulator
    Spring Cartridges
    Email iconEmail to a Friend
    Availability: In Stock

    Use these spring cartridges to adjust the pressure of your Netafim regulator. Simply replace the factory-installed springs with springs rated for the desired PSI*.

    The 3/4" Netafim regulator uses one spring cartridge
    The 1 1/2" Netafim regulator uses two cartridges
    The 2" Netafim regulator uses four cartridges

    Springs are available in 9, 12, 20, 35, 50 and 65 PSI.

    • Name
    • Weight
    • Price
    • Qty
    •  
    • 9 PSI Spring Cartridge
      PRNESP9
    • 0.125 lbs
    • $8.75
    • 12 PSI Spring Cartridge
      PRNESP12
    • 0.125 lbs
    • $8.75
    • 20 PSI Spring Cartridge
      PRNESP20
    • 0.131 lbs
    • $8.75
    • 35 PSI Spring Cartridge
      PRNESP35
    • 0.134 lbs
    • $8.75
    • 43 PSI Spring Cartridge
      PRNESP43
    • 0.13 lbs
    • $8.75
    • 50 PSI Spring Cartridge
      PRNESP50
    • 0.141 lbs
    • $8.75
    • 65 PSI Spring Cartridge
      PRNESP65
    • 0.139 lbs
    • $8.75