The 3/4" x 1/2" Easy Loc Reducing Coupler is the ideal solution for stepping down your irrigation line size. It allows you to connect a high-capacity 3/4" supply line directly to a standard 1/2" distribution line without the need for multiple bushings or adapters.
This fitting is perfect for extending a garden system where the water volume requirements decrease further down the line, or for branching off a 3/4" header into smaller 1/2" zones. With Easy Loc collars on both ends, you get a secure, leak-proof seal on two different tubing sizes simultaneously.
Understanding compatibility is key. This fitting connects two different sizes of tubing.
| Specification | Details |
|---|---|
| Product Type | Reducing Coupler (3/4" to 1/2") |
| Connection 1 (Large) | 3/4" Easy Loc (Fits .940" OD Tubing) |
| Connection 2 (Small) | 1/2" Easy Loc (Fits .700" OD Tubing) |
| Operating Pressure | 0 - 60 PSI (Optimal range: 20-30 PSI) |
| Material | Polypropylene with Carbon Black/UV Stabilizers |
| MPN | EL3412 |
| Common Brand Names | Irritec, Perma-Loc, Power Loc |
Follow these steps to splice two different tubing sizes together.
Step 1: Prep Tubing
Ensure both your 3/4" and 1/2" tubing ends are cut squarely and are free of dirt.
Step 2: Unlock the Fitting
Rotate the Easy Loc locking collars on both ends backwards (towards the center) to expose the internal barbs. Do not remove the nuts completely.
Step 3: Insert Tubing
Match the tubing size to the correct side (Large nut = 3/4", Small nut = 1/2"). Push the tubing onto the barbs until they hit the stops.
Step 4: Lock it Down
Twist the locking collars forward (over the tubing) to clamp the connections. Hand-tighten firmly.
Check your tubing sizes carefully:
Ensure your system runs smoothly by pairing this adapter with the right components:
Dec 11th 2025
Dec 10th 2025
Dec 9th 2025
Dec 8th 2025
