The High Pressure Hose Extension is the ultimate heavy-duty leader hose, designed specifically to withstand constant static pressure. Unlike standard "hose savers" or coil hoses that are meant only for downstream use, this reinforced rubber extension is rated for up to 150 PSI, making it safe to install before your timer or valves.
Built with professional-grade components, this extension acts as a flexible bridge between your hard plumbing and your filter assembly. It relieves the mechanical stress on your faucet caused by heavy irrigation fittings and manifolds, preventing costly damage to your home's pipes while maintaining a leak-proof, high-pressure seal.
Professional specs for a reliable connection.
| Specification | Details |
|---|---|
| Product Type | High Pressure Leader Hose |
| Connection Types | 3/4" FHT Inlet x 3/4" MHT Outlet |
| Inlet Connection | 3/4" Female Hose Thread (FHT) Swivel |
| Outlet Connection | 3/4" Male Hose Thread (MHT) |
| Pressure Rating | 150 PSI (Static/Constant) |
| Material | Reinforced Rubber with Brass Couplings |
| Manufacturer | DripWorks |
Step 1: Inspect the Connection
Ensure the high-quality rubber washer is seated inside the female swivel end. This is critical for holding back high static pressure.
Step 2: Attach to Faucet
Screw the female end onto your hose bibb. Tighten by hand, then give it a small 1/4 turn with pliers if necessary to seal against high pressure—but do not overtighten.
Step 3: Connect Components
Attach your filter, regulator, or timer to the male end. The hose allows you to lay these components on the ground or mount them to a wall, removing the weight from the faucet.
Protect your investment with these compatible high-performance parts:
Feb 9th 2026
Feb 5th 2026
Feb 4th 2026
Feb 3rd 2026
