The Female Hose x 1" Female Pipe Adapter is the essential link for feeding large-capacity irrigation equipment from a standard residential water source. Featuring a swivel hose connection on one side and large 1" Female Pipe Threads (FPT) on the other, this fitting allows you to screw a commercial 1" Filter or regulator directly onto a garden hose spigot or hose end.
The built-in swivel collar is a game-changer for installation, allowing you to tighten the hose connection without spinning your entire filter or regulator assembly. This is one of our most practical irrigation fittings for growers who need the flow capacity of 1" components but rely on standard hose bibs for water supply.
Ensure you have the right thread match.
| Specification | Details |
|---|---|
| Product Type | Swivel Adapter (Hose to Pipe) |
| Connection 1 (Inlet) | 3/4" Female Hose Thread (FHT) Swivel |
| Connection 2 (Outlet) | 1" Female Pipe Thread (FPT) |
| Material | Plastic (Polypropylene) |
| MPN | C5-FHSFPT10 |
| Common Brand Names | Irritec |
Follow this order for a frustration-free install.
Step 1: Prep the Pipe Threads
Wrap the threads of your 1" Male Pipe Thread (MPT) component (filter, regulator, or nipple) with thread seal tape.
Step 2: Install the Adapter
Screw the 1" FPT side of the adapter onto the taped component. Hand-tighten securely.
Step 3: Check the Washer
Ensure a standard hose washer is seated inside the swivel collar of the adapter.
Step 4: Connect to Source
Screw the swivel collar onto your garden faucet or hose end. The swivel allows you to tighten this connection without rotating your now-attached 1" equipment.
Double-check your sizes:
Everything you need for a secure connection:
Oct 8th 2026
Oct 7th 2026
Oct 6th 2026
Oct 5th 2026
