DIG Irrigation S-305DCA DC Solenoid (6-9 volt) with 4 adapters for DIG, Rainbird, Toro and Hunter

DIG's Unimax S-305DC solenoid is a two-way magnetic latching solenoid that can adapt to various brand-name valves using DIG's threaded adapters. The solenoid can also operate with various two-wire DC controllers for up to 200 feet using 14-AWG wire. The S-305 uses sealed plastic over-molding to prevent water or contaminants from entering the solenoid housing. The normal actuation of the S-305 is via a bidirectional pulse.

Features:

• Adapts to a wide range of valves using DIG adapters
• Contains an encapsuled plunger and spring for reliable operation
• Uses sealed plastic over-molding technique for waterproof construction
• Has two 16- AWG color coded 18" wires

Specifications:

• Type: DC Solenoid
• Solenoid actuator thread: 11-16"-12UN
• Operating Pressure: 10-150 PSI (.7-10.5 BAR)
• Control orifice: 1.65mm
• Pilot flow: minimum .075 GPM at 80 PSI
• Temperature Range: 32-170°F (0-77°C)
• Weight: 4.2 oz
• Diameter:1.225" (3.1cm)