The 1/2" Easy Loc Tee x 3/4" PVC Slip is a specialized transition fitting designed to feed two directions of 1/2" Poly Tubing from a single 3/4" PVC pipe. It is commonly used in permanent landscape installations where rigid PVC is plumbed to the garden bed, providing a sturdy, permanent anchor point for the drip system.
The center outlet features a 3/4" Slip Socket that glues directly onto standard PVC pipe, while the two side arms feature Easy Loc collars to secure your drip lines. This setup creates a reliable "T" configuration, perfect for splitting a zone in half or running tubing along the perimeter of raised beds.
Understanding compatibility is key. This fitting joins PVC Pipe to Poly Tubing.
| Specification | Details |
|---|---|
| Product Type | 1/2" Easy Loc Tee x 3/4" Slip |
| Connection 1 & 2 (Run) | 1/2" Easy Loc (Fits .690" - .710" OD) |
| Connection 3 (Center) | 3/4" Slip (Solvent Weld Socket) |
| Tubing Compatibility | Standard 1/2" Poly Tubing (.700" OD) |
| Operating Pressure | 0 - 60 PSI (Optimal range: 20-30 PSI) |
| MPN | ELT34S |
| Common Brand Names | Irritec, Perma-Loc, Power Loc |
Follow these steps to connect your PVC supply to your drip lines.
Step 1: Glue the PVC
Clean and prime your 3/4" PVC pipe stub. Apply PVC solvent cement (glue) to the pipe and the inside of the adapter's Slip socket. Push the fitting firmly onto the pipe and hold for 30 seconds to bond.
Step 2: Unlock the Sides
Rotate the two Easy Loc locking collars backwards (towards the center) to expose the barbs. Do not remove the nuts completely.
Step 3: Connect Tubing
Push your 1/2" poly tubing onto the barbs on both sides until they hit the stops.
Step 4: Lock it Down
Twist the locking collars forward (over the tubing) to clamp the connections. Hand-tighten firmly.
Check your pipe and tubing sizes:
Ensure your installation is permanent and secure:
Dec 17th 2025
Dec 16th 2025
Dec 15th 2025
Dec 11th 2025
