The 1/2" Compression x 3/4" Slip Adapter allows for a seamless transition from rigid PVC piping to flexible drip tubing. Designed to glue directly over the end of a standard 3/4" PVC pipe, this fitting eliminates the need for threaded connectors or extra couplers. It is the perfect solution for extending 1/2" poly tubing from a PVC riser or a cut irrigation line.
This adapter features a 3/4" Slip (Socket) on one side for a permanent solvent weld, and a high-quality compression ring on the other to grip the drip tubing. As one of our most robust irrigation fittings, it ensures a leak-proof, professional-grade connection that withstands the rigors of underground or surface installation.
Verify your pipe size before installation.
| Specification | Details |
|---|---|
| Product Type | PVC Slip x Compression Adapter |
| Connection 1 (Inlet) | 3/4" Slip Socket (Fits OVER 3/4" PVC Pipe) |
| Connection 2 (Outlet) | 1/2" Compression (Fits .690" - .710" OD Tubing) |
| Operating Pressure | 0 - 60 PSI (Optimal: 20-30 PSI) |
| Material | High-Impact ABS/PVC Compatible |
| Manufacturer | Jain |
| MPN | 12500994 |
Requires PVC Primer and Glue (Solvent Cement).
Step 1: Prep the Pipe
Cut your 3/4" PVC pipe square and remove any burrs. Clean the outside of the pipe and the inside of the adapter's socket. Apply Purple Primer to both surfaces.
Step 2: Glue the Adapter
Apply PVC Glue to the pipe end and the adapter socket. Push the adapter firmly onto the pipe, twist a quarter turn, and hold for 30 seconds to bond.
Step 3: Connect Tubing
Cut your 1/2" poly tubing squarely. Push it into the compression end of the adapter. Rock the tubing back and forth while pushing firmly until it passes the internal resistance ring (approx. 1/2" to 3/4" deep).
Ensure this adapter fits your setup:
Everything you need for a permanent installation:
Oct 15th 2026
Oct 13th 2026
Oct 12th 2026
Oct 8th 2026
