The 1/2" Compression Male Hose End is the ultimate solution for finishing your drip irrigation runs. This adapter converts the end of your 1/2" poly tubing into a standard 3/4" Male Hose Thread (MHT), creating the perfect attachment point for a Hose Cap or flush valve. By installing this fitting at the end of your zone, you can easily open the line to flush out sediments and debris, extending the life of your emitters.
Reliable and durable, this adapter is one of our most practical irrigation fittings. It features a high-quality compression ring that grips the tubing securely, ensuring a leak-proof seal even under fluctuating pressures. The threaded outlet is compatible with any standard garden hose accessory, giving you flexibility in how you manage your system's maintenance.
Key details for compatibility.
| Specification | Details |
|---|---|
| Product Type | Male Hose End Adapter |
| Connection 1 (Inlet) | 1/2" Compression (Fits .690" - .710" OD Tubing) |
| Connection 2 (Outlet) | 3/4" Male Hose Thread (MHT) |
| Operating Pressure | 0 - 60 PSI (Optimal: 20-30 PSI) |
| Material | High-Impact ABS Plastic |
| Manufacturer | DIG |
| MPN | 24-022 |
Follow these steps for a secure installation.
Step 1: Prep the Tubing
Cut the end of your 1/2" poly tubing squarely. Ensure it is clean and smooth.
Pro Tip: Allow the tubing to warm in the sun or dip the end in hot water to soften it, making insertion much easier.
Step 2: Connect the Compression End
Push the tubing into the compression side of the fitting. Rock it back and forth while pushing firmly until it passes the internal resistance ring (approx. 1/2" to 3/4" deep).
Step 3: Attach Accessory
Screw your Hose Cap or Automatic Flush Valve onto the threaded 3/4" MHT end. Hand-tighten only to avoid damaging the threads or washer.
Ensure this adapter fits your components:
Finish your setup with these essential parts:
Jun 8th 2026
Jun 4th 2026
Jun 3rd 2026
Jun 2nd 2026
