Greenhouse Irrigation

Greenhouse Irrigation

We have several products designed primarily for use in greenhouses. In addition to the items on this page, you may want to check out the Dig Greenhouse Battery Timer.

  • Array.prod_name|replace:

    Greenhouse Kit
    Item #: KGRN
    Email iconEmail to a Friend
    Availability: In Stock

    The Greenhouse Misting Kit is perfect for propagation. The 10 tornado misters can be inverted for overhead watering and each come with an anti-drip device.

    Name
    Greenhouse Kit - KGRN
    Price
    Each:  $58.50
    Qty
     
  • Array.prod_name|replace:

    Emitter Cap for DNPC
    Item #: DNPCAP
    Email iconEmail to a Friend
    Availability: In Stock

    The DNPCAP is a cap that completely closes off the emitter. One end of the cap is placed securely between the emitter and the mainline tubing so that it will never be misplaced.

    Name
    Emitter Cap for DNPC - DNPCAP
    Price
    10+   $0.16
    100+   $0.15
    Qty
     
  • Array.prod_name|replace:

    Woodpecker Multi-Outlet Dripper Assemblies
    Item #: DMWASS
    Email iconEmail to a Friend
    Availability: In Stock

    These multi-outlet assemblies attach to the outlet of a Woodpecker or Woodpecker Jr. emitter and divide its flow evenly. There are two types of assemblies, both of which have two 18" and two 30" tubes with Arrow Drippers at the ends. Since DMWASS has a flat, closed top, it must be used when four outlets are desired. If eight, twelve or sixteen outlets are needed, the open-top, stackable assembly (DMWST) is used on the bottom, with the closed-top (DMWASS) on top. Use the DNPCAP to shut off the emitter when not being used. Woodpecker emitters and Cap purchased separately.

    Name
    Woodpecker Multi-Outlet Dripper Assemblies - DMWASS
    Price
    Each:   $2.20
    100+   $1.95
    Qty
     
  • Array.prod_name|replace:

    Woodpecker Multi-Outlet Dripper Assemblies
    Item #: DMWST
    Email iconEmail to a Friend
    Availability: In Stock

    These multi-outlet assemblies attach to the outlet of a Woodpecker or Woodpecker Jr. emitter and divide its flow evenly. There are two types of assemblies, both of which have two 18" and two 30" tubes with Arrow Drippers at the ends. Since DMWASS has a flat, closed top, it must be used when four outlets are desired. If eight, twelve or sixteen outlets are needed, the open-top, stackable assembly (DMWST) is used on the bottom, with the closed-top (DMWASS) on top. Use the DNPCAP to shut off the emitter when not being used. Woodpecker emitters and Cap purchased separately.

    Name
    Woodpecker Multi-Outlet Dripper Assemblies - DMWST
    Price
    Each:   $2.20
    100+   $1.95
    Qty
     
  • Array.prod_name|replace:

    Woodpecker 4-Way Splitter
    Item #: DMPCA
    Email iconEmail to a Friend
    Availability: In Stock

    This is a 4 way splitter for watering container plants that fits on the outlet end of any pressure compensating Netafim Woodpecker or Woodpecker Jr PC emitter. You can then water four container plants in a greenhouse or nursery from a single emitter. Two of the splitters can be joined together to provide eight outlets by clipping the top off one of the units and inserting it into the bottom of the other splitter. The typical layout uses 1/8" micro-tubing and an arrow dripper at the tube end. The arrow dripper must be used to equalize the flow from each outlet port and to hold the line in place.

    Name
    Woodpecker 4-Way Splitter - DMPCA
    Price
    10+   $0.23
    100+   $0.18
    Qty
     
  • Array.prod_name|replace:

    Arrow Dripper
    Item #: DMAR
    Email iconEmail to a Friend
    Availability: In Stock
    Name
    Arrow Dripper - DMAR
    Price
    10+   $0.23
    100+   $0.18
    Qty
     
  • Array.prod_name|replace:

    1/8" Polyethylene Micro Tubing
    (0.125" I.D. x 0.187" O.D.)
    Email iconEmail to a Friend
    Availability: In Stock

    Use this 1/8" polyethylene micro tubing to connect 1/8" Spot Spitters, or Pot Drippers to your mainline tubing.

    • Name
    • Weight
    • Price
    • Qty
    •  
    • 1/8" Poly Tubing
      100' Roll
      18100
    • 0.578 lbs
    • $4.50
    • 1/8" Poly Tubing
      500' Roll
      18500
    • 4.2 lbs
    • $21.30
    • 1/8" Poly Tubing
      1000' Roll
      181000
    • 6.78 lbs
    • $34.00
  • Array.prod_name|replace:

    Anti-Drip Devices
    Item #: MEAD
    Email iconEmail to a Friend
    Availability: In Stock

    When using overhead (inverted) irrigation in greenhouses, each sprinkler or mister assembly must have an anti-drip device to prevent damage to plants directly below.

    Name
    Anti-Drip Devices - MEAD
    Price
    Each:   $1.40
    100+   $1.25
    Qty
     
  • Array.prod_name|replace:

    Grommet for Anti-Drip
    Item #: MEGRO
    Email iconEmail to a Friend
    Availability: In Stock

    Grommet is used for PVC insertion

    Name
    Grommet for Anti-Drip - MEGRO
    Price
    Each:  $0.30
    Qty
     
  • Array.prod_name|replace:

    Press Fit Coupler
    Item #: MECPL
    Email iconEmail to a Friend
    Availability: In Stock
    Name
    Press Fit Coupler - MECPL
    Price
    10+   $0.18
    Qty
     
  • Array.prod_name|replace:

    Press-Fit Barb
    Item #: MEBARB
    Email iconEmail to a Friend
    Availability: In Stock

    This press-fit barb is used to insert a press-fit sprinkler (Ein Dor, Wing, or Tornado Misters) into 1/4" micro tubing or directly into 1/2" or larger mainline tubing. Simply press the sprinkler head into the larger side of the press-fit barb fitting and insert the 1/4" barbed end of the fitting into the tubing.

    Name
    Press-Fit Barb - MEBARB
    Price
    5+   $0.15
    100+   $0.14
    Qty
     
  • Array.prod_name|replace:

    Tornado Misters - 10/24 Pressfit version
    Email iconEmail to a Friend
    Availability: In Stock

    Tornado Press Fit misters do not go directly into your tubing. They require a MEBARB fitting, which is available either as part of the Ein Dor Support Kits or can be purchased separately.

    • Name
    • Weight
    • Price
    • Qty
    •  
    • Tor Fogger--Black--Press Fit
      MTFBPR
    • 0.006 lbs
    • 5+   $0.59
      100+   $0.52
  • Array.prod_name|replace:

    Plastic Weight
    Item #: DNWGT
    Email iconEmail to a Friend
    Availability: In Stock

    This lead-free plastic weight clips onto 1/4" or 1/8" tubing. It is used to hold emitters in pots or to keep hanging sprayers in place.

    Name
    Plastic Weight - DNWGT
    Price
    10+   $0.42
    100+   $0.38
    Qty
     
  • Array.prod_name|replace:

    Inverted Mini Wobbler
    Email iconEmail to a Friend
    Availability: In Stock

    Specially designed for overhead applications such as seed propagation in a greenhouse.

    • Great for seed propagation
    • Outstanding Uniformity - Fine Drolets
    • Pipe Thread: 1/2" Male Pipe Thread
    • Flow Rates: 0.3 to 2.5 GPM
    • Operating Pressure: 15-40 PSI



    Inverted Mini Wobbler
    Part Color GPH
    @ 20 PSI    		 Radius
    @ 20 PSI    		 GPH
    @ 30 PSI    		 Radius
    @ 30 PSI
    MWIG Gold 57 GPH 11 ft 82 GPH 11 ft
    MWIBG Beige 45 GPH 11 ft 55 GPH 11 ft
    Radius is at 6 feet above the beds

    Flow rates below rated at 20 PSI

    • Name
    • Weight
    • Price
    • Qty
    •  
    • Mini-Wobbler Anti Drip
      MWANTI
    • 0.1 lbs
    • $5.85
    • Inv Mini-Wobbler--Beige
      MWIBG
    • 0.023 lbs
    • $4.90
    • Inv Mini-Wobbler--Gold
      MWIG
    • 0.023 lbs
    • $4.85