Electronic (AC) Valves
and Accessories

These high quality, in-line valves are designed for use with any of the electronic AC timers we carry, or most any other 24 volt electric timer. These valves operate at low flows to accommodate the lower water use of drip systems.
All in-line valves are designed for below ground installation (inside a valve box), and have female pipe threads on both inlet and outlet.
See our manifold swivel fittings for a fast, flexible and easy way to assemble electric valves.
IMPORTANT NOTES:
- Do not use pipe dope around any automated valve (AC or DC).
- Always install a filter in your system before your electric valves.
Debris in the valve will void any warranty. - Always install valves in the horizontal position.
Failure to do so may cause damage to the valve. - The solenoid should be on the downstream side of the valve. There is an arrow on the side of each valve indicating the direction of the flow of water.
- Local building codes may require the inclusion of a back flow prevention device when using valves other than anti-siphon valves. Check with your local building inspector or municipality for details.
-
Baccara AC Valves
Availability: In StockThe only electric AC valve that works with low pressure and low flow. Baccara valves have a large pressure range of 4.3 to 140 PSI and a very low head loss at high flow rates (see chart in details tab below). Their efficient design and advanced technology plastics make the valves strong with very low maintenance.
- Female pipe thread (FPT) inlet and outlet
- Use these 24 volt AC valves with electric AC timers
- Pressure Range: 4.3 - 140 PSI
- Flow Range:
3/4" valve: 0.5 - 22 GPM
1" valve: 0.5 - 29 GPM
1 1/2" valve: 30 - 120 GPM
2" valve 40 - 140 GPM - Features:
Automated or manual operation
Progressive opening/closing reduces water hammer
- Name
- Weight
- Price
- Qty
-
1" Hunter Jar Top AC Valve
Item #: VHJARAvailability: In StockThis is the perfect valve for people who believe system maintenance should be simple. Most automated valves fail because of debris inside the valve. With a simple twist, the top of the valve will unscrew and the valve can be inspected and cleaned if necessary, with no tools needed!
- 1" Female pipe thread (FPT) inlet and outlet
- Use this 24 volt AC valve with electric AC timers
- Pressure Range: 20 - 150 PSI
- Flow Range: 0.2 - 30 gallons per minute (GPM)
- Features:
Battery or manual operation
Twist-off top allows for easy maintenance
Name1" Hunter Jar Top AC Valve - VHJARPriceEach: $22.50
-
Rainbird AC Valves
Availability: In StockThese professional series Rainbird 24 volt AC in-line valves are designed for below ground installation (inside a valve box). An above-ground, anti-siphon Rainbird valve is also available.
- Female pipe thread (FPT) inlet and outlet
- Use these 24 volt AC valves with electric AC timers
- Pressure Range: 15 - 150 PSI
- Flow Range:
3/4" valve: 0.2 - 22 GPM
1" valve: 0.2 - 28 GPM - Features: Automated or manual operation
- Name
- Weight
- Price
- Qty
-
Rainbird AC Anti Siphon Valves
Availability: In StockThese professional series Rainbird 24 volt AC anti-siphon valves are the only anti-siphon valves we have found designed specifically for the lower flow rates of a drip irrigation system. An in-line Rainbird valve, without an anti-siphon, is also available.
- Female pipe thread (FPT) inlet and outlet
- Use these 24 volt AC valves with electric AC timers
- Pressure Range: 15 - 150 PSI
- Flow Range:
3/4" valve: 0.2 - 22 GPM
1" valve: 0.2 - 40 GPM - Features:
Automated or manual operation Complies with back-flow prevention codes
NOTE: The top of the valve should be at least 6" above the highest point in the irrigation system.- Name
- Weight
- Price
- Qty
-
Valve Assemblies
-
Ready-To-Use Valve Setup
Availability: In StockThese pre-assembled, Teflon-taped and ready-to-use valve assemblies include a high-quality 3/4" Baccara AC valve and all of the parts needed to connect directly to your faucet. The manifold start assembly (TMBVHST) is the base assembly and includes the parts to connect one valve to your faucet. Extra valves can easily be added by removing the end cap and using the add-on assembly (TMBVHAD). The outlet of each valve is already adapted to male hose threads and ready to connect to a drip system.
All you need is a direct burial wire and wire connectors to connect these valve assemblies to your AC timer. A constant pressure filter and pressure limit valve can also be added to the manifold start assembly, see the illustration in the details tab below.- Name
- Weight
- Price
- Qty
-
Olson Waterwell
Pre-Assembled ManifoldAvailability: In StockThese factory-built, factory-tested, multi-valve assemblies make installation quick and easy. No need to purchase and assemble the components for installing multiple 1" control valves. The Olson Waterwell pre-assembled manifold is ready to connect to power and water sources.
Available with 3, 4 or 6 electric (AC) valves.- Name
- Weight
- Price
- Qty
-
Rain Sensors
For use with electronic AC timers with a rain sensor port. Some timers require a 'normally open' rain sensor (TGALMS) and others a 'normally closed' rain sensor (TMS). Check the specifcations for your timer before ordering. -
Mini Clik Rain Sensor
(Normally Closed)Item #: TMSAvailability: In StockThe Mini-Clik rain sensor has moisture absorbing disks that swell when it rains, then shrink during dry periods. This makes the Mini-Clik more accurate than other style sensors.
- Normally closed rain sensor
- Shuts down the valve when it rains
- Works with most electric AC timers with a sensor port
- Adjustable to the amount of rainfall (1/3", 1/4", 1/2", 3/4" or 1")
- Note: Check the specifications of your timer to ensure compatibility
NameMini Clik Rain Sensor
(Normally Closed) - TMSPriceEach: $29.00 -
Mini Clik Rain Sensor
(Normally Open)Item #: TGALMSAvailability: In StockThe Mini-Clik rain sensor has moisture absorbing disks that swell when it rains, then shrink during dry periods. This makes the Mini-Clik more accurate than other style sensors.
- Normally open rain sensor
- Shuts down the valve when it rains
- Works with most battery DC timers with a sensor port
- Adjustable to the amount of rainfall (1/3", 1/4", 1/2", 3/4" or 1")
- Note: Check the specifications of your timer to ensure compatibility
NameMini Clik Rain Sensor
(Normally Open) - TGALMSPriceEach: $36.00 -
Pump Start Relay
-
Pump Start Relay
Item #: TPUMPAvailability: In StockIf your system requires a booster pump or you pull water directly from a creek or pond, this relay switch will activate a pump motor up to 2 HP at 110V or 3.5 HP at 240V.
- Effortless 24V connection
- Compatible with all 24V AC timers with a pump start port
- Wide array of knockouts for wiring/installation
- Enclosure is weatherproof, lockable, and shockproof
NamePump Start Relay - TPUMPPriceEach: $72.00 -
Electric (AC) Valve Replacement Parts
-
Replacement Solenoid for Baccara AC Valves
Item #: VBACSOLAvailability: In StockReplacement Solenoid for Baccara AC Valves.
NameReplacement Solenoid for Baccara AC Valves - VBACSOLPriceEach: $11.50 -
Replacement Diaphragm
for Baccara Valves (3/4" and 1")Item #: VBACDIA34Availability: In StockReplacement Diaphragm for 3/4" and 1" Baccara Valves.
NameReplacement Diaphragm
for Baccara Valves (3/4" and 1") - VBACDIA34PriceEach: $6.10 -
Replacement Solenoid
for Olson (VOM) ValvesItem #: VOMSOLAvailability: In StockReplacement solenoid for Olson AC electric valves. Olson valves are included in our popular Olson Waterwell Pre-Assembled Manifold.
NameReplacement Solenoid
for Olson (VOM) Valves - VOMSOLPriceEach: $15.00 -
Replacement Bonnet
for Olson (VOM) ValvesItem #: VOMDIAAvailability: In StockReplacement diaphragm for Olson valves. Olson valves are included in our popular
Olson Waterwell Pre-Assembled Manifold.NameReplacement Bonnet
for Olson (VOM) Valves - VOMDIAPriceEach: $16.00 -
Bonnet -- All VOM valves
Item #: VOMBONAvailability: In StockReplacement bonnet for Olson valves. Olson valves are included in our popular Olson Waterwell Pre-Assembled Manifold.
NameBonnet -- All VOM valves - VOMBONPriceEach: $23.50 -
Valve Boxes
-
Valve Boxes
Availability: In StockValve boxes are typically placed in the ground over your valves to protect them. The lids for these rigid plastic valve boxes easily snap on and off for easy access to the irrigation valves and fittings placed below.
- Name
- Weight
- Price
- Qty
-
- Name
- Weight
- Price
- Qty
















